iPod Touch 7th Generation Front Panel Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南。

英语

中文

上一步下一步

正翻译步骤 4

步骤 4

iPod Touch 7th Generation Front Panel Replacement: 步骤 0 中的图像 1，3

iPod Touch 7th Generation Front Panel Replacement: 步骤 0 中的图像 2，3

iPod Touch 7th Generation Front Panel Replacement: 步骤 0 中的图像 3，3

Hold the iPod firmly against a table or bench.
Place your thumb and index finger over the lower corners of the display to stop the display from opening too far when the adhesive breaks.
Lift the suction cup up and back toward the top of the iPod. Be patient, and pull with firm, constant force until the adhesive breaks and the display comes up from the rear case.
It may be necessary to use a heat gun to soften the adhesive (especially in cooler climates). If you can pry the screen apart, and the adhesive is still sticking and pulling apart like cheese topping on a pizza, you can slide a thin razor blade in and gently cut the adhesive.
After the display begins to lift from the rear case, be careful not to lift more than about an inch—a fragile plastic frame still connects the display assembly to the rear case.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。