跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
Use a flathead screwdriver to remove the screw from the device.
  • Use a flathead screwdriver to remove the screw from the device.

  • The size of the driver will depend on the size of the screw, but use the largest size that will fit in your cut.

  • If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts; if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.

  • Wear eye protection and give your device a few good blasts of compressed air before reassembling it. The rotary tool can scatter loose metal shavings around the device, creating the potential for an electrical short if not blown clear.

使用一字头螺丝起子将螺丝拧出电子用品。

螺丝起子的尺寸是根据螺丝尺寸而定,但使用最大尺寸会符合你切割的尺寸。

若你的螺丝起子无法插入浅沟,使用旋转工具将浅沟切大。但只需微切即可; 若切割太多,螺丝起子将无法碰触到螺丝边缘,进而无法转动螺丝。

穿戴防护镜,并在组装前,将电子用品上的灰尘吹干净。旋转工具切割完后,会造成金属碎片,若没吹干净的话,会有造成短路的可能。

在开源创作共享许可协议下,你的投稿已被许可