跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 6

步骤 6
In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw. We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw.
  • In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw.

  • We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw.

  • You want the cut to be deep enough that you can fit a flathead screwdriver into it, but thin enough that the screwdriver has something to grip.

  • Make a single thin cut into the head of the stripped screw.

在此步骤,你将使用旋转工具在滑丝的螺丝上,切割出一条浅沟,让你可以使用一字头的螺丝起子拧出螺丝。

我们建议使用低速旋转(我们使用的是2挡,共6挡),避免破坏到电子用品的本身或是螺丝的部分。

在切割的同时,深度只需切到一字头螺丝起子可以插入的深度能够转动即可。

在滑丝的螺丝头上,切割出一条浅沟。

在开源创作共享许可协议下,你的投稿已被许可