跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 4

步骤 4
Lift open the laptop screen and flip it around so that the keyboard is facing up. Insert a plastic opening tool into one of the corners to create a gap between the bottom panel and the keyboard panel. Guide the plastic opening tool around the perimeter of the panel to detach all the clips that are supporting it in place.
  • Lift open the laptop screen and flip it around so that the keyboard is facing up.

  • Insert a plastic opening tool into one of the corners to create a gap between the bottom panel and the keyboard panel.

  • Guide the plastic opening tool around the perimeter of the panel to detach all the clips that are supporting it in place.

  • Do not pull the panel off by one corner as it can cause damage to the plastic.

  • Detach the keyboard panel from the frame.

  • There are two ribbon cables attached to the keyboard and trackpad so do not pull the keyboard panel away until you disconnect these ribbons in the next step.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可