跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Detach the DLP board from where it is connected to the motherboard by a large 100 pin connector. Pry up gently while wiggling from left to right if needed.
  • Detach the DLP board from where it is connected to the motherboard by a large 100 pin connector.

  • Pry up gently while wiggling from left to right if needed.

  • The ribbon cable on the other side of the board could break if pulled too hard.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可