跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
Use some isopropyll to remove the old Thermal Grease/Compound from the heat sink.
  • Use some isopropyll to remove the old Thermal Grease/Compound from the heat sink.

  • Apply A little amount of Thermal Compound to the Copper part of the cooling unit in the same positioning as the last. A miniscule amount, just enough to create a tiny layer.

  • Screw in the Cooling unit/Heat sink. Screw the 2 bottom screws first then the top screw.

  • Plug the wires from the Cooling Fan back into the Mother Board.

  • There you have it :) Your new Processor is installed.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可