跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Insert the new Processor. Twist the screw Clockwise Back into its original position (So the black point is pointing right).
  • Insert the new Processor.

  • Twist the screw Clockwise Back into its original position (So the black point is pointing right).

  • Use isopropyll to clean the processor is necessary.

  • Open up the thermal Compound and apply it to the shiny reflective part of the new processor ( Do not use lots only a little is needed but ensure that the whole of it is covered).

  • It should look just about like the second Photo but it will differ in colour and positioning.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可