跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
Unplug the wires connected to the logic board from the Cooling Fan. Unscrew the three screws (Boxed In Red). Lift out the Fan and the heat sink it is attached to.
  • Unplug the wires connected to the logic board from the Cooling Fan.

  • Unscrew the three screws (Boxed In Red).

  • Lift out the Fan and the heat sink it is attached to.

  • Twist the screw slightly to the left, so that the pointed black plastic point looks like picture 3. It will not come out easily if this is done wrong so check, check then check again.

  • Lift out the processor carefully.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可