翻译步骤＃1 - Motorola Moto X4 Opening Procedure Prerequisite

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Heat the screen

Before you begin, turn off your phone.
Heat an iOpener and apply it to the left edge of the phone for two minutes.
You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.
A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.
As you wait, take note of the the following areas:
Display cable—be careful not to slice too deeply near the edge here, or you may damage the display cable.
Fingerprint sensor cable—be careful not to slice too deeply near the edge here, or you may damage the fingerprint sensor cable.

在开源创作共享许可协议下，你的投稿已被许可。