Philips Wake-Up HF35xx Disassembly

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南。

英语

中文

上一步

正翻译步骤 7

步骤 7

Philips Wake-Up HF35xx Disassembly, Remove back cover (Optional but recommended): 步骤 0 中的图像 1，2

Philips Wake-Up HF35xx Disassembly, Remove back cover (Optional but recommended): 步骤 0 中的图像 2，2

Remove back cover (Optional but recommended)

Disconnect the speaker from the main circuit board.
The antenna (a long white wire) has a fragile solder connection to the main circuit board and care should be taken to not yank upon it.
Loosen the screw and washer inside the back cover by the speaker and unwrap the antenna wire that was pinned underneath. Pull the antenna all the way through so the back cover can be removed.
Alternately, you may simply pull only some of it through so that the wire is slack enough that the solder joint is at no risk.
Caution: The speaker and the buzzer connectors are the same so be careful when reassembling.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。