跳转到主内容

Philips Wake-Up HF35xx Disassembly

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 2

步骤 2
Prying open the ring cover
  • Flipping the light on its back will present a small section of the bezel that can be pried out. It is a small plastic strip with hooks that have to be disengaged to be removed.

  • Push the blade of the jimmy directly into the crevice above the cover. Once it has gone a few millimeters, tilt it to lift the cover slightly.

  • Slide the jimmy to the right side and press it against the latch to release it. Do the same for the left side.

  • A "jimmy" is essentially a small putty knife with a strong, slightly flexible blade.

  • Note: Despite the images shown, a spudger is not recommended as the fit is so tight it takes quite a bit of effort to insert and slide.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利