跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 7

步骤 7
Once done, apply some UV Curable Solder Mask to the jumper wiring area for insulation protection. Continue to solidify the flex cable under the UV Dryer Lamp. Stick High-temperature Tape/Solder Joint Sticker on the jumper wiring area to reinforce.
Solidify
  • Once done, apply some UV Curable Solder Mask to the jumper wiring area for insulation protection. Continue to solidify the flex cable under the UV Dryer Lamp.

  • Stick High-temperature Tape/Solder Joint Sticker on the jumper wiring area to reinforce.

接着美工刀蘸取少量绿油涂抹在飞线位置,进行绝缘处理。再用UV灯做固化处理。

用高温胶纸/焊点贴贴住飞线区域进行加固。

在开源创作共享许可协议下,你的投稿已被许可