跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 6

步骤 6
Notes: keep the soldering iron tip away from pins of undamaged cables to prevent these pins from getting shorted.
Jumper-wiring
  • Notes: keep the soldering iron tip away from pins of undamaged cables to prevent these pins from getting shorted.

  • Once completed, check again to make sure that there is no shorted pin or pseudo soldering condition. Clean thoroughly with PCB Cleaner afterwards.

注意:焊接时,烙铁头不要碰到其他完好排线的引脚。以免造成引脚短路。

焊接完后,确保引脚无短路或者虚焊,再用洗板水清洁。

在开源创作共享许可协议下,你的投稿已被许可