跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 5

步骤 5
Tin the broken flex cable with solder paste. Once done, clean with PCB Cleaner. Again, apply Paste Flux to the broken flex cable. Solder the two ends of the wire to the two pins of the broken cable.
Jumper-wiring
  • Tin the broken flex cable with solder paste. Once done, clean with PCB Cleaner.

  • Again, apply Paste Flux to the broken flex cable. Solder the two ends of the wire to the two pins of the broken cable.

给断裂排线加锡,接着再用洗板水清洁。

再次给断裂排线加助焊膏。将漆包线两端分别焊接到断裂排线的两个引脚。

在开源创作共享许可协议下,你的投稿已被许可