跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 4

步骤 4
Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
Disconnect the battery
  • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally contacting the socket.

使用撬棒或干净的指甲从主板上的插槽向上撬起电池接口。

尽量不要损坏该电路板和其它电路板连接周围的黑色硅胶密封条。这些密封件可提供额外的保护,防止水和灰尘侵入。

将连接器稍微弯曲离开主板,以防止其意外接触插槽。

在开源创作共享许可协议下,你的投稿已被许可