跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 2

步骤 2
Use a Y000 driver to remove the three 1.1 mm-long screws securing the battery connector bracket. Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.
Unscrew the battery connector cover
  • Use a Y000 driver to remove the three 1.1 mm-long screws securing the battery connector bracket.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

使用Y000 螺丝刀卸下固定电池接口支架的三颗1.1毫米长的螺丝。

在整个维修过程中,请跟踪每个螺丝,并确保其准确地回到原位。

在重新组装期间,这是打开iPhone并测试所有功能的好方法,然后再将显示屏密封就位。在继续工作之前,请确保完全关闭iPhone的电源。

在开源创作共享许可协议下,你的投稿已被许可