跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 10

步骤 10
If the glass remains stuck, re-heat and slice the adhesive repeatedly as needed. Lift the rear glass carefully, making sure it's fully separated from any adhesive.
  • If the glass remains stuck, re-heat and slice the adhesive repeatedly as needed.

  • Lift the rear glass carefully, making sure it's fully separated from any adhesive.

  • Remove the rear glass.

  • During reassembly, pause here to replace the adhesive on the rear glass using a precut adhesive card or high-strength double-sided adhesive tape, such as Tesa 61395.

  • After closing your device back up during reassembly, stack something heavy, like a textbook or two, on top of the device for 30-60 minutes. This ensures a strong adhesive bond.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可