修复你的物品 社区 商店

iPhone 11 Pro 电池更换

上一步 下一步

正翻译步骤 7

返回指南
英语
中文
步骤 7
iPhone 11 Pro Battery Replacement, Remove the bottom adhesive strip: 步骤 0 中的图像 1，3 iPhone 11 Pro Battery Replacement, Remove the bottom adhesive strip: 步骤 0 中的图像 2，3 iPhone 11 Pro Battery Replacement, Remove the bottom adhesive strip: 步骤 0 中的图像 3，3
Remove the bottom adhesive strip

  • Grab the pull tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.

  • Don't press down on the battery. Hold the iPhone firmly by its sides.

  • Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.

  • Pull at a low angle so the strip doesn't snag on the edge of the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.

  • If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.

移除底部粘性小拉条

在以下步骤中，你将拉动每个小拉条以缓慢拉开电池下方的粘合剂。

粘合剂在拉伸时会折断。如果小拉条折断，请不要惊慌！继续阅读一些其它有关去除折断条带的步骤。

不要按下电池。紧握iPhone侧面。

拉动时，使条带保持平整且无皱纹。

缓慢拉动，使条带有时间拉伸和分离。拉伸大约需要30秒钟才能去除每个条带。

以低角度拉动，使条带不会紧贴电池的底部边缘。

如果电池条确实在电池下方折断而无法取回，请继续使用其他电池条，然后继续执行下面的其它步骤。

[title] Remove the bottom adhesive strip
[* black] Grab the pull tab with your fingers and ''slowly'' pull it away from the battery, toward the bottom of the iPhone.
[* black] Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.
[* black] Don't press down on the battery. Hold the iPhone firmly by its sides.
[* black] Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.
[* black] Pull at a low angle so the strip doesn't snag on the edge of the battery.
-[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but ***do not*** pry under the battery.
+[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or [product|IF145-020-4|blunt tweezers], and continue pulling—but ***do not*** pry under the battery.
[* icon_caution] If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。