打开屏幕流程

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的13本指南。

英语

中文

正翻译步骤 7

步骤 7

Lift the display slightly

Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
Insert an opening pick into the gap under the screen and the plastic bezel, not the screen itself.
The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

轻轻抬起显示屏

用恒定的拉力向上拉动吸盘，以在前面板和后壳体之间形成一个很小的间隙。
在拉开的间隙中插入一个撬片，不是在屏幕本身。
将显示器固定在位的防水粘合剂非常牢固； 产生此初始间隙需要大量的力。 如果您在打开缝隙时遇到困难，请继续加热，然后上下轻轻摇动屏幕以分离粘合剂，直到产生足够的缝隙以插入工具为止。