跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
中文

正翻译步骤 5

步骤 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

用恒定的恒定压力向上拉动吸盘,以在前面板和后壳体之间形成一个很小的间隙。

在间隙中插入一个开口镐。

将显示器固定在位的防水粘合剂非常牢固; 产生此初始间隙需要大量的力。 如果您在打开缝隙时遇到困难,请施加更多的热量,然后上下轻轻摇动屏幕以弱化粘合剂,直到产生足够的缝隙以插入工具为止。

在开源创作共享许可协议下,你的投稿已被许可