跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor. Remove the connected wires. Remove the connected wires.
  • Remove the motor from the case and unscrew the two 8mm screws, using the T3 Torx Screwdriver, on the back of the motor.

  • Remove the connected wires.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可