跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Carefully disconnect the UMD drive ribbon cable from the logic board. Use the PSP opening tools to push the black tabs on the connector horizantally to free the cable. This connector cannot be removed vertically. Doing so will damage the connector and/or ribbon cable.
  • Carefully disconnect the UMD drive ribbon cable from the logic board. Use the PSP opening tools to push the black tabs on the connector horizantally to free the cable.

  • This connector cannot be removed vertically. Doing so will damage the connector and/or ribbon cable.

  • At this point it is useful to tape the loose metal parts with some masking tape so they don't fall out whilst you have the PSP the other way up.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可