跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 8

步骤 8
Check if the fuse is brown with multimeter. There should be zero resistance between "Neutral" on the plug and the lower connector of the water heater. (This photo is actually taken after replacement, so the reading is zero.) If the reading from multimeter shown the fuse is disconnected. Loosen the screw and pull out the silicone tube holding the thermal cutoff fuse. If the reading from multimeter shown the fuse is disconnected. Loosen the screw and pull out the silicone tube holding the thermal cutoff fuse.
Check and remove the thermal cutoff fuse.
  • Check if the fuse is brown with multimeter. There should be zero resistance between "Neutral" on the plug and the lower connector of the water heater. (This photo is actually taken after replacement, so the reading is zero.)

  • If the reading from multimeter shown the fuse is disconnected. Loosen the screw and pull out the silicone tube holding the thermal cutoff fuse.

再量一下溫度保險絲。可以從電源中性線跟加熱管的下方接頭之間量,或是直接測量矽膠套管中拆出來的溫度保險絲兩端。

通路表示保險絲正常,斷路則是已經燒毀。溫度保險絲燒斷後不能復歸,只能更換。

在开源创作共享许可协议下,你的投稿已被许可