跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 26

步骤 26
Line up the components you will use to put the northbridge heatsink back onto the PCB.
  • Line up the components you will use to put the northbridge heatsink back onto the PCB.

  • Use 16 mm long 3M stainless steel bolts, stainless steel washers and nylon washers. Re-use the springs from the plastic stays. The items will be assembled in the order shown from top to bottom:

  • bolt; metal washer; spring; heatsink; PCB; nylon washer; metal washer; nut.

  • If for some reason the springs have been lost, you can use a spring from a ball point pen. Cut out a section about 1.5 cm long.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可