跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
You can use a piece of cloth to minimize the phone rocking over the camera bump. Apply a suction handle near the top edge of the phone right under the earpiece speaker. If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.
  • You can use a piece of cloth to minimize the phone rocking over the camera bump.

  • Apply a suction handle near the top edge of the phone right under the earpiece speaker.

  • If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Use the suction handle to pull up the screen and insert just the tip of an opening pick under the right edge of the speaker recess.

  • Rotate the opening pick sideways to bring the long edge of the pick under the display glass and slide it to the top right corner. Leave it there to prevent the adhesive from resealing.

你可以使用一块布来最大程度地减少手机在相机凸起上方的晃动。

在听筒扬声器正下方的手机顶部边缘附近使用吸盘。

如果手机屏幕破裂,则吸柄可能粘不住。尝试用牢固的胶带将其提起,或将吸盘手柄粘在适当的位置并使其固定,以便继续进行操作。

使用吸柄拉起屏幕,然后将三角撬片仅插入扬声器凹槽右边缘下方。

侧向旋转三角撬片,将撬片的长边放在显示屏玻璃下方,然后将其滑动到右上角。留在那里,以防止胶粘剂重新密封。

在开源创作共享许可协议下,你的投稿已被许可