跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
中文

正翻译步骤 2

步骤 2
Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible. If the phone's rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. Lift the rear glass with the suction handle to create a gap between the glass and the frame.
  • Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.

  • If the phone's rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Lift the rear glass with the suction handle to create a gap between the glass and the frame.

  • Insert an opening pick into the gap.

  • If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Slide the opening pick to the bottom right corner of the phone.

将吸盘固定在后玻璃板的下边缘,并尽可能靠近边缘。

如果手机的后玻璃破裂,则吸柄可能不会粘住。尝试用牢固的胶带将其提起,或将吸盘手柄粘在适当的位置并使其固定,以便继续进行操作。

用吸柄提起后玻璃板,以在玻璃板和框架之间留出空隙。

将三角撬片插入间隙中。

如果遇到问题,请施加更多热量以进一步软化粘合剂。请按照iOpener说明进行操作,以免过热。

将打开的三角撬片滑到手机的右下角。

在开源创作共享许可协议下,你的投稿已被许可