跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
日语

正翻译步骤 2

步骤 2
Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible. If the phone's rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. Lift the rear glass with the suction handle to create a gap between the glass and the frame.
  • Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.

  • If the phone's rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Lift the rear glass with the suction handle to create a gap between the glass and the frame.

  • Insert an opening pick into the gap.

  • If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Slide the opening pick to the bottom right corner of the phone.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可