跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 20

步骤 20
The final battery cell can be more difficult to remove. If needed, apply more adhesive remover to make the job easier. Slide the corner of one of your plastic cards underneath the top edge of the large center battery cell. Wiggle the card from side to side and slide it underneath the battery cell to fully separate the adhesive holding it in place.
Separate the middle cell
  • The final battery cell can be more difficult to remove. If needed, apply more adhesive remover to make the job easier.

  • Slide the corner of one of your plastic cards underneath the top edge of the large center battery cell.

  • Wiggle the card from side to side and slide it underneath the battery cell to fully separate the adhesive holding it in place.

最终的电池单元可能更难以移除。如果需要,使用更多的粘合剂去除剂,使工作更容易。

将一张塑料卡的一角滑到大中心电池单元顶部边缘下方。

将卡从一侧向另一侧摆动,并将其滑入电池单元下方,以完全分离将其固定到位的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可