跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 16

步骤 16
Apply a few drops of adhesive remover under each of the remaining three battery cells. There are openings in the aluminum case underneath these cells, so some of the adhesive remover may leak out instead of penetrating underneath the battery. Be mindful of leaks, and apply more adhesive remover in the following steps if needed.
Apply adhesive remover
  • Apply a few drops of adhesive remover under each of the remaining three battery cells.

  • There are openings in the aluminum case underneath these cells, so some of the adhesive remover may leak out instead of penetrating underneath the battery.

  • Be mindful of leaks, and apply more adhesive remover in the following steps if needed.

  • Wait about two minutes before you continue.

在剩余的三个电池单元中的每一个下面施加几滴粘合剂去除剂。

在这些电池下方的铝制外壳中有开口,因此一些粘合剂去除器可能会泄漏而不是穿透电池下方。

注意泄漏,如果需要,可在以下步骤中使用更多的粘合剂去除剂。

等待大约两分钟再继续。

在开源创作共享许可协议下,你的投稿已被许可