跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 10

步骤 10
After a couple minutes, insert one corner of a plastic card underneath the far right battery cell, starting from the front edge. This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate. Try not to deform the battery. A damaged battery can leak dangerous chemicals and/or catch fire.
Separate the outside right battery cell
  • After a couple minutes, insert one corner of a plastic card underneath the far right battery cell, starting from the front edge.

  • This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate.

  • Try not to deform the battery. A damaged battery can leak dangerous chemicals and/or catch fire.

  • Wiggle the card from side to side and slide it all the way under the battery cell.

  • Lift to fully separate the adhesive, but don't try to remove the battery cell yet.

  • Leave the plastic card temporarily underneath the cell to prevent it from re-adhering while you continue.

几分钟后,从前边缘开始,将塑料卡的一角插入最右侧的电池单元下方。

这不需要太大的力量。如果你遇到问题,请使用更多的粘合剂去除剂,并再浸泡 2-3 分钟。

尽量不要让电池变形。电池损坏可能会泄漏危险化学品和/或着火。

将卡从一侧向另一侧摆动,并将其完全滑入电池单元下方。

抬起以完全分离粘合剂,但不要尝试取下电池。

将塑料卡暂时放在电池下面,以防止它在继续时重新粘附。

在开源创作共享许可协议下,你的投稿已被许可