菜单

你的设置

注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 9

步骤 9
Apply a few drops of adhesive remover underneath the far right battery cell. You don't need to use very much—the small bottle contains more than twice the amount of solvent needed to remove all the battery cells. Wait about two minutes for the adhesive remover to penetrate and soften the battery adhesive before you proceed to the next step.
Apply the adhesive remover

  • Apply a few drops of adhesive remover underneath the far right battery cell.

  • You don't need to use very much—the small bottle contains more than twice the amount of solvent needed to remove all the battery cells.

  • Wait about two minutes for the adhesive remover to penetrate and soften the battery adhesive before you proceed to the next step.

添加粘合剂去除液

向最靠近风扇的电池组的前部边缘下面涂少量的除胶剂。

你不需要使用太多。小瓶子含有的溶剂量是拆除所有电池所需溶剂量的两倍以上。

等待约两分钟，使粘合剂去除剂渗透并软化电池粘合剂，然后再进行下一步。

在开源创作共享许可协议下，你的投稿已被许可。