修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 15

步骤 15
Carefully slide an opening pick under the flex cable to separate it from the logic board, and push it carefully aside. Be very careful not to damage this delicate flex cable. The attached Touch ID sensor is uniquely paired to your MacBook's logic board—if damaged, only Apple can successfully replace it. If you have trouble, don't force it—apply a little more heat and try again.
Pry up the Touch ID cable

  • Carefully slide an opening pick under the flex cable to separate it from the logic board, and push it carefully aside.

  • Be very careful not to damage this delicate flex cable. The attached Touch ID sensor is uniquely paired to your MacBook's logic board—if damaged, only Apple can successfully replace it.

  • If you have trouble, don't force it—apply a little more heat and try again.

撬起 Touch ID 电缆

小心地将三角撬片滑到柔性电缆下方，以将其与主板分离，然后小心地将其推到旁边。

请务必小心，以免损坏易碎的柔性电缆。随附的 Touch ID 传感器与 MacBook 的主板唯一配对——如有损坏，只有 Apple 才能成功更换它。

如果遇到麻烦，请不要强行加热，多加一点热量，然后重试。

在开源创作共享许可协议下，你的投稿已被许可。