跳转到主内容
英语
中文

正翻译步骤 14

步骤 14
The daughterboard comes out without a fuss, bringing the soldered-on USB-C port and lower microphone in tow. Soldered-on isn't our favorite flavor of USB-C port, but at least there isn't much on this board, so replacements shouldn't be too expensive. We frisk the edges of the phone to find ... two more mmWave antenna modules! Given 5G mmWave's limitations, having these directional, beam-forming antennas on each side (plus the third one facing the screen) helps the Note10+ achieve maximum effort.
  • The daughterboard comes out without a fuss, bringing the soldered-on USB-C port and lower microphone in tow.

  • Soldered-on isn't our favorite flavor of USB-C port, but at least there isn't much on this board, so replacements shouldn't be too expensive.

  • We frisk the edges of the phone to find ... two more mmWave antenna modules! Given 5G mmWave's limitations, having these directional, beam-forming antennas on each side (plus the third one facing the screen) helps the Note10+ achieve maximum effort.

  • The earpiece speaker looks pretty ordinary, except that it's completely trapped behind the screen. How do the songs get out? More on that later...

子板被拿出来时,我们完全不慌,上面焊接着USB-C端口和底端麦克风。

我们不希望将USB-C端口焊接在板子上,但好在这块板上没有太多东西,因此更换应该不会太昂贵。

我们看了看手机的边缘…找到了两个毫米波天线模块!考虑到5G毫米波的限制,每侧都有这些定向的波束成形天线(加上第三个面向屏幕的天线)有助于Note10 +实现最好的效果。

听筒看起来很普通,只不过它被放在了屏幕后面。 声音是怎么出来的? 稍后会详细说明......

在开源创作共享许可协议下,你的投稿已被许可