跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 17

步骤 17
There are three rubber pieces that are stuck on with adhesive that need to be removed. They can be removed with anything small and thin enough to get under them. Under the rubber, there are screws that need to be unscrewed.
Step 13: Removing the bezel
  • There are three rubber pieces that are stuck on with adhesive that need to be removed. They can be removed with anything small and thin enough to get under them.

  • Under the rubber, there are screws that need to be unscrewed.

  • After that, take a opening pick and insert it at an angle shown in the second picture.

  • It may be beneficial to use more than one to hold your place (to make sure places you already separated don't snap back in again

  • Repeat the last two steps (three if this one is included) as many times as needed until the bezel is removed.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可