翻译步骤＃29 - iPad Mini 3 Wi-Fi LCD Shield Plate Replacement - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南。

英语

中文

上一步下一步

正翻译步骤 29

Step 29

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.
Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

在开源创作共享许可协议下，你的投稿已被许可。