跳转到主内容

2016年带 Touch Bar 的 MacBook Pro 主板组件更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 24

步骤 24
MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: 步骤 0 中的图像 1,3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: 步骤 0 中的图像 2,3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: 步骤 0 中的图像 3,3
  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

从插座中垂直向上撬开所有三根天线电缆。

将镊子或撬棒的扁平端滑到每根电缆下方,直到它靠近插座,然后轻轻扭动或撬起以断开连接。

要重新连接每根电缆,请将接口直接对准其插槽,然后向下按,使其卡入到位。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利