注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。
正翻译步骤 3
步骤 3
-
Apply mild heat to the trackpad ribbon cable to soften the adhesive securing it to the battery.
-
You can use an iOpener, hair dryer, or heat gun, but be careful not to overheat the battery. The cable should be warm, but not too hot to touch.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。