修复你的物品 社区 商店

2016年末带 Touch Bar 的15寸 MacBook Pro 底壳更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
MacBook Pro 15" Touch Bar Late 2016 Lower Case Replacement: 步骤 0 中的图像 1，1

  • Completely power off and unplug your MacBook Pro before you begin.

  • Close the display and flip the entire laptop upside-down.

  • Use a P5 Pentalobe driver to remove six screws securing the lower case, of the following lengths:

  • Four 4.7 mm screws

  • Two 6.6 mm screws

  • Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

开始之前，请完全关闭并拔下 MacBook Pro的电源插头。

关闭显示屏并翻转整个笔记本电脑。使用P5 五角螺丝刀卸下固定底壳的六个螺丝，长度如下：

四颗 4.7 mm 螺丝

两颗 6.6 mm 螺丝

在拆卸螺钉时请注意螺丝的方向 —— 需要以微小的角度重新安装。

在整个维修过程中，记录每个螺丝并确保它准确地回到原来的位置以避免损坏你的设备。

-[* icon_caution] Completely power off and unplug your MacBook Pro before you begin. Close the display and flip the entire laptop upside-down.
+[* icon_caution] Completely power off and unplug your MacBook Pro before you begin.
+[* black] Close the display and flip the entire laptop upside-down.
[* black] Use a P5 Pentalobe driver to remove six screws securing the lower case, of the following lengths:
[* red] Four 4.7 mm screws
[* orange] Two 6.6 mm screws
[* icon_reminder] Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.
[* icon_reminder] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your device.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。