跳转到主内容
英语
中文

正翻译步骤 9

步骤 9
Remove the crimped hose clamps securing from each end of the pump you are replacing. You can use a clamp removal tool to cut the clamps. Alternatively, use pliers to unlatch the small retaining tab on the clamp.
  • Remove the crimped hose clamps securing from each end of the pump you are replacing.

  • You can use a clamp removal tool to cut the clamps.

  • Alternatively, use pliers to unlatch the small retaining tab on the clamp.

  • Pry the clamp apart to loosen it.

  • Use your fingers or pliers to pull the hoses off of the pump nozzles.

  • The hoses will leak liquids when pulled out.

  • This will take significant force. If you are having trouble, heat the hose ends with a hair dryer or heat gun, and try again.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可