跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 11

步骤 11
Align the screen and press it down firmly onto the adhesive. For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive. Then, apply some pressure for a few hours—wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.
  • Align the screen and press it down firmly onto the adhesive.

  • For best results, apply heat from your iOpener, heat gun, or hair dryer to help set the adhesive.

  • Then, apply some pressure for a few hours—wrapping the watch with a couple rubber bands, or placing it under a heavy book or two.

  • As a final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.

对齐显示屏并将其牢牢按在粘合剂上。

为了进一步改善粘合剂的粘合程度,你可以使用iOpener预热显示器,然后再将其按下约一分钟。

[* black] Align the screen and press it down firmly onto the adhesive.
[* icon_reminder] To improve bonding of the adhesive you can use an iOpener[* black] For best results, apply heat from your iOpener, heat gun, or hair dryer to warm uphelp set the display. Thenadhesive.
[* black] Then,
apply some pressure for a few hours (placinghours—wrapping the watch with a couple rubber bands, or placing it under one or twoa heavy books overnight might bebook or two.
[* black] As
a way)final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.
[* icon_reminder] To improve bonding of the adhesive you can use an iOpener[* black] For best results, apply heat from your iOpener, heat gun, or hair dryer to warm uphelp set the display. Thenadhesive.
[* black] Then,
apply some pressure for a few hours (placinghours—wrapping the watch with a couple rubber bands, or placing it under one or twoa heavy books overnight might bebook or two.
[* black] As
a way)final check, power on your watch and make sure Force Touch works correctly—a hard press on the screen should cause the watch to vibrate, and the press should register on the display.

在开源创作共享许可协议下,你的投稿已被许可