跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 4

步骤 4
Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch. Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.
  • Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.

  • Scour the case using a cleaning pad, or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater). In a pinch, a Q-tip may also work.

  • To remove the adhesive near the display cables, fold the display back down over the watch and carefully tilt it away from the frame so there's room to work.

  • Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.

在棉签上涂抹一点异丙醇(> 90%酒精)或使用清洁垫轻轻去除Force Touch垫圈上残留的任何粘合剂。

要取下显示屏电缆下方的粘合剂,请将显示屏几乎关闭,并在清洁时轻轻将其拉离边缘。

[* black] ApplyClean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.
[* black] Scour the case using
a little bit[product|IF145-308|cleaning pad|new_window=true], or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (>90%) to a Q-tip90% concentration or usegreater). In a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive from the casepinch, a Q-tip may also work.
[* icon_note] To remove the adhesive on the side wherenear the display cables are runningcables, fold down the display back down over the watch and carefully pulltilt it away from the frame so there's enough spaceroom to work.
[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time
.
[* black] ApplyClean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch.
[* black] Scour the case using
a little bit[product|IF145-308|cleaning pad|new_window=true], or use the tip of an opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (>90%) to a Q-tip90% concentration or usegreater). In a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive from the casepinch, a Q-tip may also work.
[* icon_note] To remove the adhesive on the side wherenear the display cables are runningcables, fold down the display back down over the watch and carefully pulltilt it away from the frame so there's enough spaceroom to work.
[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time
.

在开源创作共享许可协议下,你的投稿已被许可