注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 1
步骤 1
Battery
-
Use an iOpener to loosen the adhesive beneath the battery. Apply the iOpener on the display for at least two minutes.
-
In the following step, only apply the spudger in the areas marked in red, which is where the battery adhesive is located.
-
Avoid the orange area where the display flex cable is running.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。