跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
What, no iOpener? Although it would help, this phone was easy enough to open without heat—a rarity these days. A spongy, easily-separated adhesive secures the display—which is good for repairs. But it's probably a trade-off that also leaves this phone less than waterproof, so beware. The usual tiny side bezels leave this expensive OLED panel vulnerable to our opening pick. Expecting this, we safely slice alongside the display and free it from the phone.
  • What, no iOpener? Although it would help, this phone was easy enough to open without heat—a rarity these days.

  • A spongy, easily-separated adhesive secures the display—which is good for repairs. But it's probably a trade-off that also leaves this phone less than waterproof, so beware.

  • The usual tiny side bezels leave this expensive OLED panel vulnerable to our opening pick. Expecting this, we safely slice alongside the display and free it from the phone.

  • Just like old times, the display is connected to the motherboard by a single ribbon cable.

  • Rumors pointed to a "gOLED" display made by LG, but this is unmistakably a Samsung panel.

  • Spoiler alert: we're also tearing down a 3a XL, and that's got a Samsung panel, too.

  • Also along for the ride is a Synaptics S3706 touchscreen controller.

啥?没有 iOpener?即使它会有所帮助,这台手机不需要加热就可以打开——在当今世界可是非常稀有。

一个海绵状,易分离的粘合剂固定了屏幕——这对维修来说是件好事。但是这导致了这台手机没有防水功能,所以要小心。

这正常大小的边框使得这块昂过的 OLED 屏幕易于让我们找到地方下手。期待着这些,我们安全的划开了屏幕的边缘并拆了出来。

就和以前一样,屏幕用一根柔性电缆拦截着主板。

传言称这是一块 LG 制造的“gOLED”屏幕,但着无疑是 Samsung 制造的。

剧透警告,我们也拆了 3a XL,也得到了一块 Samung 的面板

此外,还有一款 Synaptics S3706 触屏控制器。

在开源创作共享许可协议下,你的投稿已被许可