跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 6

步骤 6
Insert a fifth opening pick at the top right corner of the rear glass. Slide the opening pick along the right edge of the phone to cut the remaining adhesive. Don't open the phone all the way yet. The proximity sensor flex cable is still connected to the motherboard.
  • Insert a fifth opening pick at the top right corner of the rear glass.

  • Slide the opening pick along the right edge of the phone to cut the remaining adhesive.

  • Don't open the phone all the way yet. The proximity sensor flex cable is still connected to the motherboard.

在后玻璃盖的右上角插入第五个三角撬片。

沿着手机的右边缘滑动三角撬片以切割剩余的粘合剂。

不要直接撬开手机。接近传感器的柔性电缆仍然连接到主板。

在开源创作共享许可协议下,你的投稿已被许可