跳转到主内容
英语
中文

正翻译步骤 15

步骤 15
Carefully insert a spudger underneath the battery at the same hight as the display connectors. You might need to reapply an iOpener or adhesive remover. Be careful not to puncture the battery by prying too hard. Pry up the battery using the spudger and cut the remaining adhesive with it.
  • Carefully insert a spudger underneath the battery at the same hight as the display connectors. You might need to reapply an iOpener or adhesive remover.

  • Be careful not to puncture the battery by prying too hard.

  • Pry up the battery using the spudger and cut the remaining adhesive with it.

  • Lift the battery with the spudger to ensure all the adhesive is loosened.

  • Place the plastic card under the center of the battery cell, and leave it there to prevent the adhesive from re-sealing.

  • Mind the Smart Connector cable.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可