跳转到主内容
英语
意大利语

正翻译步骤 13

步骤 13
Do not apply any solvent to the Smart Connector flex cable to avoid it to loosen during the battery removal. Apply some solvent underneath the battery at the three separate points where the longer adhesive strips are located. Only apply the solvent point by point and not in a seamless movement. Allow the solvent to penetrate for several minutes to help weaken the adhesive.
  • Do not apply any solvent to the Smart Connector flex cable to avoid it to loosen during the battery removal.

  • Apply some solvent underneath the battery at the three separate points where the longer adhesive strips are located. Only apply the solvent point by point and not in a seamless movement.

  • Allow the solvent to penetrate for several minutes to help weaken the adhesive.

Non applicare alcun solvente al cavo a nastro dello Smart Connector per evitare di allentarlo durante la rimozione della batteria.

Applica del solvente sotto la batteria nei tre punti separati dove sono attaccate le strisce adesive più lunghe. Applica il solvente solo nei punti precisi e non uniformemente sotto l'iPad.

Lascia agire il solvente per diversi minuti per ammorbidire l'adesivo.

在开源创作共享许可协议下,你的投稿已被许可