跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing. In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown in the last two images: Adhesive
  • Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing.

  • In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown in the last two images:

  • Adhesive

  • Smart Connector cable

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可