跳转到主内容
英语
意大利语

正翻译步骤 11

步骤 11
Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing. In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown in the last two images: Adhesive
  • Set the logic board back down, leaving the spudger underneath to prevent the adhesive from re-sealing.

  • In the following steps, you'll use a liquid solvent (such as iFixit Adhesive Remover or high-concentration isopropyl alcohol) to weaken the adhesive under the battery. The location of the adhered areas and the Smart Connector flex cable underneath the battery are shown in the last two images:

  • Adhesive

  • Smart Connector cable

Riappoggia la scheda madre nel suo alloggio, lasciando lo spudger infilato al di sotto per evitare che l'adesivo si reincolli.

Nei prossimi passaggi dovrai usare del solvente liquido (come l'Antiadesivo iFixit o l'alcol isopropilico ad alta concentrazione) per ammorbidire l'adesivo sotto la batteria. Le aree con l'adesivo e il cavo a nastro dello Smart Connector sono evidenziate nelle ultime due immagini di questo passo:

Adesivo

Cavo Smart Connector

在开源创作共享许可协议下,你的投稿已被许可