跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 10

步骤 10
Remove the 1.9 mm Phillips screw that secures the battery power connector. Take extreme care when you insert the battery blocker. Insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • Remove the 1.9 mm Phillips screw that secures the battery power connector.

  • Take extreme care when you insert the battery blocker. Insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • To disconnect the battery, slide one prong of a Battery Blocker or the tip of an opening pick under the battery power connector to ensure the power circuit is interrupted.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可