跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
The ribbon cable for the button sensor pad is attached with a small clamp to the bottom left corner of the logic board. Use a small flathead screwdriver to lift the brown clasp and remove the ribbon cable.
  • The ribbon cable for the button sensor pad is attached with a small clamp to the bottom left corner of the logic board.

  • Use a small flathead screwdriver to lift the brown clasp and remove the ribbon cable.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可